Plasma Powders & Systems Incorporated
228 Boundary Road, PO Box 132
Marlboro, NJ 07746 

Phone 732-431-0992
Toll Free: 800-358-4287


Search: 

  HOME  |  EQUIPMENT  |   HANDLING EQUIPMENT   |   MATERIALS   |   PARTS   |   SPECIALS   |   CONTACT US
Equipment
  AT-400 Wire Arc Spray System
 
AT-400 Wire Arc Spray System
AT 400 Wire Arc spraying has the highest deposition rate of the thermal spraying processes. It is used when large areas or a large number of parts need to be coated. This is most common in production line formats.
The specially designed AT-400 Wire Arc Spray System ensures low operator fatigue and significantly reduced maintenance costs. The AT-400 system uses the "push" method, the driving force is a bigger, more robust wire drive motor located within the control console.
 
 
 
 
 Arc Spray Systems
 
 AT-400 Wire Arc Spray System

The specially designed AT-400 Wire Arc Spray System ensures low operator fatigue and significantly reduced maintenance costs.

The AT-400 system uses the "push" method, the driving force is a bigger, more robust wire drive motor located within the control console.

Download Product Manual
AT-400 Wire Arc Spray System

Uses Pros  Used With
Apply zinc and aluminum to structures and bridges to help prevent corrosion.
Apply copper, zinc, and aluminum to create conductive coatings.
Very low maintenance cost. Easy operation. Small in size. Typically 1/16" and 11 Gauge wires.

AT-400 Wire Arc Spray System
is a high performance and unbeatable power. Arc spraying has the highest deposition rate of the thermal spraying processes. It is used when large areas or a large number of parts need to be coated. This is most common in production line formats.
This specially designed system ensures low operator fatigue and significantly reduced maintenance costs. The AT-400 system uses the "push" method, the driving force is a bigger, more robust wire drive motor located within the control console instead of the gunhead. Pull-type systems can not offer the power or the lightweight (2.5lb.) gunhead of the AT-400.

The AT-400 Wire Arc Spray System is commonly used to:

  • Apply zinc and aluminum to structures and bridges to help prevent corrosion
  • Apply copper, zinc, and aluminum to create conductive coatings

FEATURES

  • Patented Quick Change Wire Guide System
  • Quick Change Wire Drive Rolls
  • Re-settable LCD Wire Counter
  • Re-settable LCD Time Counter
  • Preflow and Burnback Air adjustments
  • Remote/Local Voltage/Amperage Control
  • Display/Hold adjustment
 
 

2011-2014 Plasma Powders & Systems Inc., 228 Boundary Road, PO Box 132, Marlboro, NJ 07746   
Phone 732-431-0992   -  Toll Free: 800-358-4287
website design by NovaStar web design