HVAF Thermal Spray Guns, High Velocity Air Fuel Guns, HVAF Equipment | Thermal Spray Equipment, Plasma Spray Equipment

Equipment

Plasma Powders

High Velocity Air Fuel provides the highest spray rate out of all thermal spray processes. The HVAF process uses a lower temperature which helps reduce oxidation of the coating. The impact of solid particles creates compressive stresses, this decreases tensile (residual) stresses generated due to shrinkage of the cooling coating material.

228 Boundary Road
PO Box 132
Marlboro, NJ 07746
Phone 732-431-0992

Quasar HVAF Spray Gun

High Velocity Air Fuel Spray Gun
The Quasar represents the new generation of A.C. - H.V.A.F. guns. The gun features hydrogen micro-injection that boosts the deposit efficiency by 15-25% and further improves coating quality.

Quasar HVAF Spray Gun

Uses	Pros	Used With
Application of premium quality coatings in mass production and spray shop environments.	Good coating morphology permits polishing of WC-based coatings to an optical mirror finish.	The Solid Spray Technologies’ A.C. - H.V.A.F. System

M3 Supersonic Spray Gun

High Velocity Air Fuel Spray Gun
The new M3 is the first spray gun to use Supersonic Air Fuel technology (patent pending) to deliver particle velocities in excess of 1000-1200 m/sec, approximately double the velocity of previous models such as the M2 and SB9500.

M3 Supersonic Spray Gun

Uses	Pros	Used With
The M3 is the next stage of HVAF torches. It uses extremely high speeds to create dense coatings without requiring the high heat of HVOF systems.	Creates an extremely dense coating while keeping the material cool.	Used with the Ultracoat control panel and any type of powder.