|
Wirejet-98 Wire Spray Gun
The Sprayjet-98 Gun has been designed and build to be one of the world’s best hand guns for producing flame sprayed coatings with metalizing wires.
It has a universal gas head, which can be adapted to use any fuel gas. The standard gun is set up to spray 1/8” wire using acetylene as the fuel gas. Suitable hardware is available for handling all standard wire sizes ranging from 3/16” down 1/16”.
The controlled speed range of the Sprayjet-98 Gun is from about 2 to 15 feet wire per minute with standard gears to approximately 5 to 15 feet per minute with the special easily installed, high speed gear set. The high-speed gear set is for continuous high speed spraying of the lower melting point metals such as zinc, Babbit and tin.
Although the Sprayjet-98 Gun has been designed primarily for hand-held operation, a simple, rugged tool post fixture is supplied with each unit to permit mounting on a machine tool such as a lathe.
The Sprayjet-98 Gun offers many
outstanding design features:
-
An improved version of Sprayjet-98 Gun’s siphon jet gas head produces high spray rates, low gas consumption and extreme resistance to backfire and its effects.
-
Surfaces between the Nozzle and siphon plug are sealed with "O" rings, instead of being lapped surfaces, which are trouble some to maintain.
-
A thumb operated wire feed control, for starting and stopping the wire feed.
-
A new grease seal on the high-speed turbine shaft minimizes leakage of lubricant.
-
A sight plug permits checking the level of lubricant in the gear case without the need to open it, eliminating a source of contamination.
-
The gas head valve provides long service life with minimum maintenance. Worn or damaged valve parts can be replaced in the field without lapping or other precise fitting.
-
New design nozzles and air caps provide excellent coatings at very high spraying speeds.
-
The nozzle, siphon plug and front wire guide assemble as a unit, which can quickly and easily be removed and replaced when changing wire size, or for servicing.
-
Sprayjet-98 Gun’s controlled-power governor provides increase power and more stable wire speed.
-
The gear chamber contains a built-in pump for circulating the gear lubricant. This coupled with large rugged gears and improved gear chamber sealing provides longer gear life.
-
The drive rolls and wire guides are made of hardened stainless steel for high resistance to wear and corrosion.
-
The gun-mounting stud is centrally located, making it very easy to adjust the gun position when it is lathe-mounted.
-
Available extensions: 1
ft,2 ft,3 ft extension, Propane or acetylene.
|
